The Bondtech LGX is en route! Pre-order yours today!

Hotend Configurator

Creality CR-10 / CR-10 (Mini) / CR-10S / CR-10 S4 / CR-10 S5 - Mosquito® Magnum Hotend

Mosquito® Magnum Hotend
Mosquito® Magnum Hotend
Mosquito® Magnum Hotend
Mosquito® Magnum Hotend
Mosquito® Magnum Hotend
Mosquito® Magnum Hotend
Mosquito® Magnum Hotend
Mosquito® Magnum Hotend
Mosquito® Magnum Hotend
Mosquito® Magnum Hotend
Mosquito® Magnum Hotend

Mosquito® Magnum Hotend Bundle

$435.94

Bundle includes:

  • Mosquito® Magnum Hotend
  • Bondtech DDX For Creality 3D Printers
  • Adapter Set For Creality Ender / CR-10(S)
  • DDX Hotend Adapter - Mosquito®
  • Thermistor: High Temperature - 300°C
  • Nozzle Torque Wrench™: 1.5 Nm
  • Vanadium™ Nozzle (0.4 mm)
  • Plastic Repellent Paint™
  • Boron Nitride Paste
ADD TO CART
Bondtech DDX v3 For Creality 3D Printers (Left)
Bondtech DDX v3 For Creality 3D Printers (Left)
Bondtech DDX v3 For Creality 3D Printers (Right)
Bondtech DDX v3 For Creality 3D Printers with Mounting and Adapter Set For Creality Ender / CR-10(S)
Bondtech DDX v3 For Creality 3D Printers with Mounting and Adapter Set For CR-10(S) Pro/Max
DDX v3 Adapter Set For Creality Ender / CR-10(S)
DDX v3 Adapter Set For CR-10(S) Pro/Max
DDX Hotend Adapter For Copperhead™ Screw Mount (Vertical)
DDX Hotend Adapter For Copperhead™ Screw Mount (Vertical)
DDX Hotend Adapter For Copperhead™ Screw Mount (Horizontal)
DDX Hotend Adapter For Mosquito® (Vertical)
DDX Hotend Adapter For Mosquito® (Horizontal)
Thermistor: High Temperature Wiring
Thermistor: High Temperature Wiring
Thermistor: High Temperature (Slice Engineering)
Thermistor: High Temperature (450°C)
Nozzle Torque Wrench™: 1.5 Nm
Nozzle Torque Wrench™: 1.5 Nm
Nozzle Torque Wrench™: 1.5 Nm
Nozzle Torque Wrench™: 1.5 Nm
Vanadium™ Nozzle
Vanadium™ Nozzle
Vanadium™ Nozzle
Vanadium™ Nozzle
Vanadium™ Nozzle
Vanadium™ Nozzle
Vanadium™ Nozzle
Vanadium™ Nozzle
Vanadium™ Nozzle
Vanadium™ Nozzle
Vanadium™ Nozzle
Vanadium™ Nozzle
Vial with brush top
Vial with brush top
Vial with suspended brush top
Vial with sealed brush top
Vial with open brush top
Applying plastic repellent paint to a nozzle
Boron Nitride Paste
Boron Nitride Paste

Check out the newly updated Mosquito®! Now with a coated heat break!

  • The Mosquito® Magnum prints upwards of 30 mm^3/sec
  • A thermal insulator protects the extended melt zone from the effects of active cooling and radiative heat loss. It has a heat transmission rate as low as 3 W/m*K, meaning you can have ultimate confidence in the speed of your print, while at the same time maintaining the high resolution benefits achieved with the standard Mosquito® Hotend
  • The melt zone is extended proximally upwards to maintain a small form factor
  • Included thermistor covers printable thermoplastics up to 300°C
  • Modular/adaptable to almost any FFF/FDM printer
  • Lightweight
  • Note 1: For installation instructions and other important information related to the DDX upgrade, click here.
  • Note 2: If you do not want to use the DDX, you can try to print your own adapter by clicking here.