Mosquito™ Magnum Hotend Bundle
- Mosquito™ Magnum Hotend
- 50W Heater Cartridge (Voltage: 24V)
- Hotend Cooling Fan (Voltage: 24V)
- Boron Nitride Paste
- Nozzle Torque Wrench™: 1.5 Nm
- Vanadium™ Nozzle (0.8 mm)
Check out the newly updated Mosquito™! Now with a coated heat break!
- The Mosquito™ Magnum prints upwards of 30 mm^3/sec
- A thermal insulator protects the extended melt zone from the effects of active cooling and radiative heat loss. It has a heat transmission rate as low as 3 W/m*K, meaning you can have ultimate confidence in the speed of your print, while at the same time maintaining the high resolution benefits achieved with the standard Mosquito™ Hotend
- The melt zone is extended proximally upwards to maintain a small form factor
- 450°C temperature rating covers all printable thermoplastics
- Modular/adaptable to almost any FFF/FDM printer
- Note: Requires a printable adapter! Click here for the adapter.