Hotend Configurator

Formbot Raptor - Mosquito™ Magnum Hotend (Bondtech BMG-M Extruder)

Mosquito™ Magnum Hotend Bundle


Bundle includes:

  • Mosquito™ Magnum Hotend
  • 50W Heater Cartridge (Voltage: 24V)
  • Hotend Cooling Fan (Voltage: 24V)
  • Boron Nitride Paste
  • Nozzle Torque Wrench™: 1.5 Nm
  • Vanadium™ Nozzle (0.8 mm)
50W Heater Cartridge - 24V
50W Heater Cartridge - 24V
50W Heater Cartridge - 24V (Slice Engineering)
50W Heater Cartridge - 12V with Heater Cartridge Extension Cable
50W Heater Cartridge - 12V
50W Heater Cartridge Extension Cable
Boron Nitride Paste
Boron Nitride Paste

Check out the newly updated Mosquito™! Now with a coated heat break!

  • The Mosquito™ Magnum prints upwards of 30 mm^3/sec
  • A thermal insulator protects the extended melt zone from the effects of active cooling and radiative heat loss. It has a heat transmission rate as low as 3 W/m*K, meaning you can have ultimate confidence in the speed of your print, while at the same time maintaining the high resolution benefits achieved with the standard Mosquito™ Hotend
  • The melt zone is extended proximally upwards to maintain a small form factor
  • 450°C temperature rating covers all printable thermoplastics
  • Modular/adaptable to almost any FFF/FDM printer
  • Lightweight
  • Note: Requires a printable adapter and the Bondtech BMG-M Extruder! Click here for the adapter.