The Bondtech LGX is en route! Pre-order yours today!

Hotend Configurator

Original Prusa i3 MK2/MK2s - Mosquito™ Magnum Hotend

Mosquito® Magnum Hotend
Mosquito® Magnum Hotend
Mosquito® Magnum Hotend
Mosquito® Magnum Hotend
Mosquito® Magnum Hotend
Mosquito® Magnum Hotend
Mosquito® Magnum Hotend
Mosquito® Magnum Hotend
Mosquito® Magnum Hotend
Mosquito® Magnum Hotend
Mosquito® Magnum Hotend

Mosquito™ Magnum Hotend Bundle

$277.93

Bundle includes:

  • Mosquito™ Magnum Hotend
  • 50W Heater Cartridge (Voltage: 12V)
  • Hotend Cooling Fan (Voltage: 12V)
  • Boron Nitride Paste
  • Nozzle Torque Wrench™: 1.5 Nm
  • Vanadium™ Nozzle (0.8 mm)
  • Groove Mount Adapter
ADD TO CART
50W Heater Cartridge - 24V
50W Heater Cartridge - 24V
50W Heater Cartridge - 24V (Slice Engineering)
50W Heater Cartridge - 12V with Heater Cartridge Extension Cable
50W Heater Cartridge - 12V
50W Heater Cartridge Extension Cable
Hotend Cooling Fan
Hotend Cooling Fan
Hotend Cooling Fan
Boron Nitride Paste
Boron Nitride Paste
Nozzle Torque Wrench™: 1.5 Nm
Nozzle Torque Wrench™: 1.5 Nm
Nozzle Torque Wrench™: 1.5 Nm
Nozzle Torque Wrench™: 1.5 Nm
Vanadium™ Nozzle
Vanadium™ Nozzle
Vanadium™ Nozzle
Vanadium™ Nozzle
Vanadium™ Nozzle
Vanadium™ Nozzle
Vanadium™ Nozzle
Vanadium™ Nozzle
Vanadium™ Nozzle
Vanadium™ Nozzle
Vanadium™ Nozzle
Vanadium™ Nozzle
Groove Mount Adapter
Groove Mount Adapter
Groove Mount Adapter
Groove Mount Adapter

Check out the newly updated Mosquito™! Now with a coated heat break!

  • The Mosquito™ Magnum prints upwards of 30 mm^3/sec
  • A thermal insulator protects the extended melt zone from the effects of active cooling and radiative heat loss. It has a heat transmission rate as low as 3 W/m*K, meaning you can have ultimate confidence in the speed of your print, while at the same time maintaining the high resolution benefits achieved with the standard Mosquito™ Hotend
  • The melt zone is extended proximally upwards to maintain a small form factor
  • 450°C temperature rating covers all printable thermoplastics
  • Modular/adaptable to almost any FFF/FDM printer
  • Lightweight
  • Note: Requires a printable adapter and Groove Mount Adapter (included)! Click here for the printable adapter.