Mosquito® Magnum+ is now available for preorder! Click here to learn more!

Hotend Configurator

VORON 2 - Mosquito™ Magnum Hotend

Mosquito® Magnum Hotend
Mosquito® Magnum Hotend
Mosquito® Magnum Hotend (Front-Top-Right)
Mosquito® Magnum Hotend (Back-Top-Left)
Mosquito® Magnum Hotend (Side)
Mosquito® Magnum Hotend (Side 2)
Mosquito® Magnum Hotend (Top)
Mosquito® Magnum Hotend (Bottom)
Mosquito® Magnum Hotend Box (Front-Left)
Mosquito® Magnum Hotend Box (Front)
Mosquito® Magnum Hotend w/ BMG-M (Front-Right)
Mosquito® Magnum Hotend w/ BMG-M (Front-Left)

Mosquito™ Magnum Hotend Bundle

$341.93

Bundle includes:

  • Mosquito™ Magnum Hotend
  • 50W Heater Cartridge (Voltage: 24V)
  • Hotend Cooling Fan (Voltage: 24V)
  • Boron Nitride Paste
  • Nozzle Torque Wrench™: 1.5 Nm
  • Thermistor: High Temperature - 450°C
  • Vanadium™ Nozzle (0.8 mm)
ADD TO CART
50W Heater Cartridge - 24V
50W Heater Cartridge - 24V
50W Heater Cartridge - 24V (Slice Engineering)
50W Heater Cartridge - 12V with Heater Cartridge Extension Cable
50W Heater Cartridge - 12V
50W Heater Cartridge Extension Cable
Hotend Cooling Fan
Hotend Cooling Fan
Extension Cable
Boron Nitride Paste
Boron Nitride Paste
Nozzle Torque Wrench™: 1.5 Nm
Nozzle Torque Wrench™: 1.5 Nm
Nozzle Torque Wrench™: 1.5 Nm
Nozzle Torque Wrench™: 1.5 Nm
Thermistor: High Temperature Wiring
Thermistor: High Temperature Wiring
300C Thermistor
Thermistor: High Temperature (450°C)
Thermistor: High Temperature (Slice Engineering)
Vanadium™ Nozzle - 0.2 mm
Vanadium™ Nozzle - 0.2 mm
Vanadium™ Nozzle - 0.3 mm
Vanadium™ Nozzle - 0.4 mm
Vanadium™ Nozzle - 0.5 mm
Vanadium™ Nozzle - 0.6 mm
Vanadium™ Nozzle - 0.8 mm
Vanadium™ Nozzle - 1.0 mm
Vanadium™ Nozzle - 1.2 mm
Vanadium™ Nozzle - 1.4 mm
Vanadium™ Nozzle - 1.8 mm

Check out the newly updated Mosquito™! Now with a coated heat break!

  • The Mosquito™ Magnum prints upwards of 30 mm^3/sec
  • A thermal insulator protects the extended melt zone from the effects of active cooling and radiative heat loss. It has a heat transmission rate as low as 3 W/m*K, meaning you can have ultimate confidence in the speed of your print, while at the same time maintaining the high resolution benefits achieved with the standard Mosquito™ Hotend
  • The melt zone is extended proximally upwards to maintain a small form factor
  • 450°C temperature rating covers all printable thermoplastics
  • Modular/adaptable to almost any FFF/FDM printer
  • Lightweight
  • Note: Requires a printable adapter! Click here for the adapter.