High-Temp Support 3DXTECH
High-Temp Support 3DXTECH

ThermaX HTS High Temperature Support Filament

Write a review
| Ask a question
Regular price
$179.00
Sale price
$179.00
Unit price
per 
Slice Engineering Free Returns & Shipping (Over $50)
Slice Engineering 30-Day Money Back Guarantee
Enjoy a 30-Day Customer Happiness Guarantee with full refund, replacement, or repair options if our products don't meet promised results. Items not manufactured by us are eligible for free returns if they remain in new and unopened condition. Exclusions apply. See terms for full details.

Free shipping over $50 is available for US customers only. See terms for full details.

4 in Stock

+

Frequently bought with:

3DXTECH's break-away high-temperature 3D printer filament support is ideal for use in dual extruder 3D printers designed to print high-temp materials.

HTS is the premium support for high-temp products, unlike most support filaments, which are not designed to withstand the heat required to print the top-end of performance materials.

Works ideal with the following ThermaX materials:

  • PEKK [PolyEtherKetoneKetone]
  • PEEK [PolyEtherEtherKetone]
  • PEI made using ULTEM™

Support Removal:

  • This is break-away support and does not dissolve.
  • High-Temp support is best removed while printed part is still warm.
  • If the finished printed part cools completely and the support removal gets too difficult, you can re-warm the part in the printer chamber or an oven not exceeding the Tg of the model material you are printing with.

Filament Specifications:

1.75mm +/- 0.05mm in diameter

Recommended Print Settings:

  • Extruder: 350-380°C
  • Bed Temp: 120-160°C
  • Bed Prep: Nano Polymer Adhesive or Polyimide Tape gives the best results.
  • Heated Chamber: All high-temp materials print better with a heated enclosure or build environment. Enclosure temp should not exceed 185°C for our high-temp support material to remain structurally sound as a support.
  • Other: Don’t use a cooling fan while printing this support.
  • Drying Instructions: 120°C for 4 hours

Technical Data Sheets and Safety Data Sheets can be located here.

ULTEM™ is a registered trademark of Sabic Innovative Plastics.

You may also like