Collection: Accessories & Parts
These little 3D printer hot end parts and accessories really pack a punch. Unlock the true potential of your printer to deliver high-quality results with our hotend parts and accessories.
Showing 54 results
Showing 54 results for "Accessories & Parts"
- Boron Nitride Paste Improve thermal performance by optimizing conductive heat transfer through 3D printer hot blocks, thermowells, RTD sensors, thermistors, thermocouples, and more. This paste is non-electrically conductive, stable at high temperatures, and acts as a reliable potting agent.Most Popular
$9.99$24.95★★★★★68 review(s) - 50W 12V Heater Cartridge Start printing engineering-grade plastics today! This high-power density 50W heater cartridge from Slice Engineering is available in 12V variations.16% OFF
$15.99$18.99★★★★★39 review(s) - Thermistor Accurately sense temperatures with our robust thermistors that are compatible with most 3D printer firmware. You can choose your preferred capacity here.
$24.99★★★★★39 review(s) - Hotend Cooling Fan Cool your hotend the right way with Slice Engineering's high-quality fans that are engineered to mount directly to Mosquito and Copperhead hotends.
$6.99★★★★★14 review(s) - Nozzle Torque Wrench™: 1.5 Nm Prevent leaking plastic by correctly tightening your nozzles with this torque wrench, famous for its one-handed nozzle change. Order this torque wrench now.
$29.99★★★★★51 review(s) - Plastic Repellent Paint™ Prevent that annoying sticky plastic buildup that causes print failures by using our Plastic Repellent Paint™. Start using this time-saving paint today.Most Popular
$16.99$19.99★★★★★51 review(s) - RTD Print at higher temperatures and improve accuracy with our RTD Pt1000 and Pt100. Both use a platinum resistor for an ideal temperature sensing performance.
$24.99★★★★★19 review(s) - Mosquito® Silicone Boot Protect your Mosquito® Hot Block from cooling air and plastic adhesion with this boot made by Slice Engineering. Purchase this 3D printer boot today.
$4.99★★★★★39 review(s) - Extension Cable for Fan or Thermistor Extend your cable's length by 1 meter with this extension cable for fan or themistor! It comes with both female Molex Micro-Fit 3.0 and male JST RE-02 connectors.
$2.99★★★★★1 review(s) - Groove Mount Adapter This Groove Mount Adapter enables integration with Mosquito® Hotends to Bowden style extruders or printers with a groove mount setup. Use this adapter today.
$12.99★★★★★4 review(s) - Industrial Heater Upgrade your 3D printer hotend with this high power density industrial 50W heater cartridge that is designed to work in enclosed heated chambers.
$19.99★★★★★8 review(s) - Filament Drying Desiccant Keep your filament dry with our activated alumina desiccant that is 10x more powerful than silica gel. Purchase this filament drying desiccant now.Most Popular
$24.99★★★★★47 review(s) - Copperhead® Silicone Boot Protect your Copperhead® Hot Block from cooling air and plastic adhesion with this silicone boot made by Slice Engineering. It's even made to repel plastic!
$4.99★★★★★21 review(s) - Eisele Liquid Fittings (2 PCS) These screw-in compression fittings are ideal for running coolant through your Mosquito® Liquid Hotend. Order brass Eisele liquid fittings at Slice Engineering!
$24.99 - Convection Shield for Mosquito Magnum+®/Prime™ Ensure defense against convective heat loss! This nozzle insulator is more durable than the traditional silicone, and will never droop or degrade over time.
$44.99★★★★★1 review(s) - Arctic MX-4 Thermal Grease Arctic MX-4 thermal grease paste improves conduction in low-temperature areas such as heat sinks. It is metal-free and non-electrically conductive. Buy now!
$3.99 - Thermocouple Upgrade your 3D printer with our thermocouples that enable it to sense temperatures up to 400°C! Slice Engineering will have you printing in no time.
$19.99★★★★★1 review(s) - Hotend Supply Pack This low-cost supply pack maximizes the heating potential of your printer and prevents sticky plastic buildups that cause print failures.
$18.99★★★★★11 review(s)
