Raise3D Pro2 Upgrade Kit
30-Day Performance Promise
Our Promise To You
If you're not seeing the results we've promised within 30 days, you can send the product back for a full refund, replacement, or repair. Exclusions apply. See terms for full details.
- Regular price
- $259.99
- Sale price
- $239.99
- Unit price
- per
Free Returns & Shipping (Over $50)
30-Day Money Back Guarantee
Free shipping over $50 is available for US customers only. See terms for full details.
Plug-and-Play Design
The Raise3D Pro2 Upgrade Kit is a drop-in, plug-and-play replacement for the stock Raise 3D Pro2 hotends. Utilizing the stock heat sink makes installation a breeze, allowing you to reap the benefits of the Copperhead hotend with minimal printer downtime. The bundle also includes GammaMaster® Nozzles for abrasion-resistant printing.
Bimetallic Heat Break™
Copperhead Bimetallic Heat Breaks are 60% more efficient at heat creep reduction than monolithic designs. Using the same high-strength copper alloy designed for optimal thermal conductivity found in Mosquito Heat Breaks, Copperhead Heat Breaks boast a higher temperature rating and flow rate potential over PTFE-lined heat breaks.
Super-Conductive Hot Block
The Copperhead Hot Block is named for its hardened, nickel-plated, copper alloy construction. Rated to 450°C, Copperhead enables printing of nearly every commercially available filament, from basic PLAs to medical-grade PAEKs. The hot block design isolates the sensor from the heater with a physical air gap, improving the temperature feedback loop, and features convenient wrench flats to simplify nozzle changes.
Compatible With:
- Raise3D Pro2
- Raise3D Pro2 Plus
Free shipping over $100 is available for US customers only. See terms for full details.
This upgrade is perfect.
❝They heat up faster than the originals. And I am no longer having clogging problems.❞
Heather G. - Verified Buyer
Installation Video
Technical Specifications
| Cooling | Air |
| Filament Diameter | 1.75 mm |
| Temperature Rating | 450°C* |
| Maximum Flow Rate Capacity | 33 mm3/s |
| Nozzle Compatibility | M6 x 1.0 (7 mm thread length) |
| Heating Power | 50 W (24 V) |
| Temperature Sensor | Thermocouple - Type K |
| Manufacturing | Made in the USA |
* Temperature Limitations: Although the Copperhead is rated up to 450°C, the Raise3D Pro2 printer is limited to 300°C by its firmware. Unfortunately, there is no workaround to this at this time.
