Prusa i3 Copperhead® Upgrade Kit - MK2.5/3/3S/3S+
Prusa i3 Copperhead® Upgrade Kit - MK2.5/3/3S/3S+

Prusa i3 Copperhead® Upgrade Kit

4 Reviews
| Ask a question
Regular price
$89.99
Sale price
$89.99
Unit price
per 
The Prusa i3 Copperhead® Upgrade Kit is an all-in-one, hotend upgrade solution for Prusa i3 printers. This plug-and-play kit eliminates heat creep, prevents clogging, and reduces print time with the Copperhead Hot Block and Bimetallic Heat Break™. The Prusa i3 Copperhead Kit even includes a GammaMaster® Nozzle and Copperhead Silicone Boot!

Looking to upgrade your MK3S+ with a Mosquito® Hotend? Click here.

1 in Stock

+

Frequently bought with:

Plug-and-Play Design
The Prusa i3 Copperhead Kit is a drop-in, plug-and-play replacement for the stock Prusa i3 Hotend. Utilizing the stock heat sink, heater, and sensor makes installation a breeze, allowing you to reap the benefits of the Copperhead hotend with minimal printer downtime.

Bimetallic Heat Break™
Copperhead Bimetallic Heat Breaks are 60% more efficient at heat creep reduction than monolithic designs. Using the same high-strength copper alloy designed for optimal thermal conductivity found in Mosquito Heat Breaks, Copperhead Heat Breaks boast a higher temperature rating and flow rate potential over PTFE-lined heat breaks.

Super-Conductive Hot Block
The Copperhead Hot Block is named for its hardened, nickel-plated, copper alloy hot block. Rated to 450°C, Copperhead enables printing of nearly every commercially available filament, from basic PLAs to medical-grade PAEKs. The hot block design isolates the sensor from the heater with a physical air gap, improving the temperature feedback loop, and features convenient wrench flats to simplify nozzle changes.

Prusa i3 Copperhead Upgrade Kit Includes

Compatible With:

  • Prusa i3 MK3S+
  • Prusa i3 MK3S
  • Prusa i3 MK3
  • Prusa i3 MK2.5
    Section
    Drop element here

    Technical Specifications

    Cooling Air
    Filament Diameter 1.75 mm
    Temperature Rating 450°C
    Maximum Flow Rate Capacity 33 mm3/s
    Nozzle Compatibility M6 x 1.0 (7 mm thread length)
    Heating Power 50 W (12 or 24 V) (Not Included)
    Temperature Sensor Compatibility 15 mm length, ø 3 mm (Not Included)
    Number of Temperature Sensors 1
    Manufacturing Made in the USA

    * Temperature Limitations: Although the Copperhead is rated up to 450°C, Prusa i3 printers are limited to 300°C by their firmware.

    You may also like