Mako™ Hotend for Bambu Lab
- Regular price
- $99.99
- Sale price
- $99.99
- Unit price
- per
30-Day Performance Promise
Our Promise To You
If you're not seeing the results we've promised within 30 days, you can send the product back for a full refund, replacement, or repair. Exclusions apply. See terms for full details.
Free Returns & Shipping (Over $50)
30-Day Money Back Guarantee
Free shipping over $50 is available for US customers only. See terms for full details.
Mako enables effortless and quick nozzle changes, saving time and hassle for Bambu Lab X1 and P1 printers. It unlocks high flow performance for efficient printing and ensures reliable thermal insulation and durability. Abrasion-resistant and compatible with a wide range of filaments, Mako provides long-lasting, versatile printing capabilities for any application.
Features
- Change nozzles in seconds
- Prevents jamming and clogs with our Bimetallic Heat Break™ technology
- Finish prints up to 60% faster*
- Improve print quality without reducing speed
- Print most plastics from flexible filaments like TPU to abrasive filaments like those reinforced with carbon and glass fibers
*To maximize your flow rate, a CHT Nozzle using our new FIN Nozzle Standard should be used.
Upgrade Options
- Electronics Preference
- Use Stock Electronics: With this option, you will need to remove the existing electronics (heater/sensor/fan) from your machine and install them into our product yourself.
- Pre-Installed Electronics: Choose this option if you would like us to pre-install the electronics into our product for you.
- Nozzle Type
- GammaMaster (FIN): Experience the strength of abrasion-resistant nozzles, ideal for printing with carbon and glass fiber filaments while also handling flexibles.
- CHT (FIN): Maximizes flow rate by splitting incoming filament into 3 strands, heating the core of the filament while enhancing mixing & boosting mechanical strength through improved inner layer bonding.
- DiamondBack (FIN): Delivers unmatched durability and precision with a solid diamond tip, capable of printing any filament without wear or nozzle changes.
- Please Note: If ordering additional nozzles, only nozzles using the FIN Standard are compatible with the Mako Hotend.
Included With Mako Hotend
- Mako Hotend for Bambu Lab
- Selected 0.4 mm FIN Nozzle (GammaMaster/CHT/DiamondBack)
- Mako Silicone Boot
- Mako Retaining Clip
- Mako Air Dam
- Heater Adapter
- Thermal Grease (Pre-applied for pre-installed electronics variants)
- Electronics (Optional)
- Heater
- Sensor
- Fan
- X1 Series
- X1
- X1-Carbon
- X1-E
- P1 Series
- P1P
- P1S
Free shipping over $50 is available for US customers only. See terms for full details.
Pre-Order Shipping Information
- Placed Order June 25th to August 5th (First Batch)
- Expected to start shipping orders by end of September 2024
- Expected to complete shipping orders by mid October 2024
- Orders with CHT FIN Nozzles
- Expected to start shipping orders by end of September. We apologize for this delay and appreciate your patience as we work with our suppliers to expedite the manufacturing of the nozzles.
- Placed Order After August 5th (Second Batch)
- Expected to start shipping orders by mid October 2024
- Expected to complete shipping orders by end of October 2024
Effortless Nozzle Changes
Mako's rigid & patented roll cage design ensures durability and crash protection, enabling nozzles to be swapped in seconds. You'll never need to remove the entire hotend again just to change the nozzle size.
Optimized High Flow Performance
The flow diffuser within Mako's hot block enables a steady and consistent flow rate that guarantees a fast and efficient printing experience. By encouraging laminar flow and minimizing internal turbulence, the flow diffuser enhances extrusion efficiency and delivers high-quality prints with every use.
Superior Thermal Performance
Experience improved printing with our Bimetallic Heat Break technology, reducing heat creep and clogging while enhancing performance with higher-temperature or difficult to process filaments like Nylon (PA), polycarbonate (PC) and TPU. Mako's thermally efficient design, including its copper hot block and aluminum heat sink, provides exceptional thermal performance for smoother, more reliable prints.
FIN Nozzle Standard
The FIN's innovative nozzle geometry interlocks with the silicone boot, completely insulating the hotend and protecting it from cool air and plastic. Multiple manufacturers, including fan favorites like Bondtech, Diamondback, and Micro-Swiss are launching versions of their best nozzles using the new FIN Standard. With a 6 mm hex, nozzles using the FIN Standard can be easily swapped using our Nozzle Torque Wrench™.
Durable and Rugged Design
Mako is designed with high-quality materials like high-strength copper alloys, aircraft grade aluminum, & strain-hardened steels, allowing it to print for thousands of hours without a drop in performance. Designed with our patented “roll cage” design, the heat sink connects to the hot block with a rigid tubular structure. This unique feature protects the delicate heat break from crashes and other abuse and allows one-handed nozzle changes.
Installation Video
Technical Specifications
| Dimensions | 25 x 15.5 x 43 mm |
| Mass | 22.9 g |
| Cooling | Air |
| Filament Diameter | 1.75 mm |
| Temperature Rating* | 400°C |
| Nozzle Compatibility | FIN |
| Maximum Heating Power | 48 W (24 V) |
| Number of Temperature Sensors | 1 |
| Manufacturing | Assembled in the USA |
* Temperature Limitations: Although the Mako Hotend is rated up to 400°C, Bambu Lab Printers are limited to 300-320°C by the firmware depending on the model.