Main Bondtech CHT Nozzle Advantages
- Higher melt capacity by increasing the surface area of the heating walls
- Affordable price
- Machined with ultra-precision
- Brass nozzle with nickel-coated surface
- May be used with 1.75 or 2.85 mm hotends.
Advantages of the Nickel Coating
A Nickel coating is applied to CHT Nozzles to provide protection against corrosion, erosion, and abrasion. Nickel-coated nozzles have more corrosion resistance and a lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.
Please Note: The RepRap & Vol style nozzles have a 6 mm hex and are compatible with our Nozzle Torque Wrench™: 1.5 Nm. The MK8 style nozzles have an 8 mm hex and will require an adapter to be compatible with our Nozzle Torque Wrench.
Recommended Materials for CHT Nozzles
Note: If you plan on printing with different materials, we recommend that you use a different nozzle for each material. Using different materials with the same nozzle causes deposit build-ups inside the nozzle which will end up causing blockages. For technical and abrasive materials, we recommend the use of our GammaMaster® Nozzles.
|Style||Dimensions (mm)||Hex (mm)|
Note: These nozzles are optimized for 1.75 mm filament, but are compatible with 2.85 mm hotends. To install/uninstall the RepRap or Vol style nozzles, a 6 mm wrench (like our Nozzle Torque Wrench) is required. To install/uninstall the MK8 style nozzles, an 8 mm wrench is required. Our Nozzle Torque Wrench may be used on MK8 style nozzles with a proper adapter.