CHT Nozzles
Bondtech CHT Nozzle

Bondtech CHT Coated Brass Nozzle

15 Reviews
| 2 answered questions
Regular price
$19.90
Sale price
$19.90
Unit price
per 

These Bondtech CHT Coated Brass Nozzles are for high-flow applications and will fit the following hotends/hot blocks:

  • Mosquito® / Magnum
  • Mosquito® Liquid
  • Mosquito® Magnum+
  • Mosquito® for Creality
  • Copperhead®
  • E3D V4, V5 and V6 blocks
  • E3D Chimera and Kraken
  • RepRap M6

Features

  • 1 unit per pack;
  • Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm;
  • Optimized for 1.75mm filament;
  • Compatible with 2.85mm filament.
  • Requires a 6mm wrench
  • Compatible with the Nozzle Torque Wrench™: 1.5 Nm

 

Check out the White Paper: "Increasing Melt Capacity With 3 Nozzle Features"

Click here to know more about the Bondtech CHT® nozzles.

Main Bondtech CHT Nozzle Advantages

  • Higher melt capacity by increasing the surface area of the heating walls
  • Affordable price
  • Machined with ultra-precision
  • Brass nozzle with Nickel coated surface
  • Rep Rap Style (M6×1×7.5×12.5)
  • May be used with 1.75 or 2.85mm hotends.

Advantages of the Bondtech CHT technology:
Bondtech CHT Nozzles split the filament into 3 thinner strands allowing the material to melt from within. In doing so, the material melts faster and higher flow rates can be used.

Advantages of the Nickel Coating
A Nickel coating is applied to Bondtech CHT Coated Brass Nozzles to provide protection against corrosion, erosion, and abrasion. Nickel-coated nozzles have more corrosion resistance and a lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

Recommended Materials
Use this nozzle with the following materials:

  • PLA
  • ABS
  • HIPS
  • PC
  • TPU
  • TPE
  • Nylon
  • PETG
  • ASA
  • PP
  • PVA

For technical and abrasive materials, we recommend the use of our Vanadium™ Nozzles.


Different nozzle sets for different materials
If you plan on printing with different materials, we recommend that you use a different nozzle for each material. Using different materials with the same nozzle causes deposit build-ups inside the nozzle which will end up causing blockages.