The GammaMaster® Nozzle is here! Click to order yours today.

THERMAX HTS High Temperature Support Filament

Write a review
| Ask a question
Regular price
$125.00
Sale price
$125.00
Unit price
per 

4 in Stock

+

3DXTECH's break-away high-temperature 3D printer filament support is ideal for use in dual extruder 3D printers designed to print high-temp materials.

HTS is the premium support for high-temp products, unlike most support filaments, which are not designed to withstand the heat required to print the top-end of performance materials.

Works ideal with the following ThermaX materials:

  • PEKK [PolyEtherKetoneKetone]
  • PEEK [PolyEtherEtherKetone]
  • PEI made using ULTEM™

Support Removal:

  • This is break-away support and does not dissolve.
  • High-Temp support is best removed while printed part is still warm.
  • If the finished printed part cools completely and the support removal gets too difficult, you can re-warm the part in the printer chamber or an oven not exceeding the Tg of the model material you are printing with.

Filament Specifications:

1.75mm +/- 0.05mm in diameter

Recommended Print Settings:

  • Extruder: 350-380°C
  • Bed Temp: 120-160°C
  • Bed Prep: Nano Polymer Adhesive or Polyimide Tape gives the best results.
  • Heated Chamber: All high-temp materials print better with a heated enclosure or build environment. Enclosure temp should not exceed 185°C for our high-temp support material to remain structurally sound as a support.
  • Other: Don’t use a cooling fan while printing this support.
  • Drying Instructions: 120°C for 4 hours

Technical Data Sheets and Safety Data Sheets can be located here.

ULTEM™ is a registered trademark of Sabic Innovative Plastics.