Collection: Spare Parts
Upgrade with premium, engineering-grade 3D printer hardware parts and components from Slice Engineering designed to enhance your printing experience.
Showing 39 results
Showing 39 results for "Spare Parts"
- High Performance Fan for Bambu Lab Enhance your Bambu Lab Hotend with our upgraded aluminum cooling fan, designed to prevent clogs and improve print consistency by acting as an additional heat sink.
$19.99 - RTD Print at higher temperatures and improve accuracy with our RTD Pt1000 and Pt100. Both use a platinum resistor for an ideal temperature sensing performance.
$24.99★★★★★19 review(s) - Industrial Heater Upgrade your 3D printer hotend with this high power density industrial 50W heater cartridge that is designed to work in enclosed heated chambers.
$19.99★★★★★8 review(s) - Hot Block Hardware Torque your Mosquito® too hard? The Hot Block Hardware pack comes with everything you need to get your Mosquito® back up and running. Shop today!
$5.99★★★★★6 review(s) - Hotend Cooling Fan Cool your hotend the right way with Slice Engineering's high-quality fans that are engineered to mount directly to Mosquito and Copperhead hotends.
$6.99★★★★★14 review(s) - Mosquito® Heat Break - 1.75 mm Need to replace your heat break? We’ve got you covered, with our Bimetallic Heat Break™ that works with Mosquito® Hotends. Purchase this heat break now.
$39.99★★★★★14 review(s) - Mosquito® Silicone Boot Protect your Mosquito® Hot Block from cooling air and plastic adhesion with this boot made by Slice Engineering. Purchase this 3D printer boot today.
$4.99★★★★★39 review(s) - Copperhead® Heat Break Print at high temperatures (up to 450°C), gain access to engineering-grade plastics, and eliminate heat creep with the low-cost Copperhead heat break.
$39.99★★★★★165 review(s) - Convection Shield for Mosquito Magnum+®/Prime™ Ensure defense against convective heat loss! This nozzle insulator is more durable than the traditional silicone, and will never droop or degrade over time.
$44.99★★★★★1 review(s) - Mako® Silicone Boot This boot protects your Mako® Hotend from cooling air and plastic adhesion, achieves a maximum temperature rating of 320°C, and completely interlocks with the nozzle.
$4.99 - Thermistor Accurately sense temperatures with our robust thermistors that are compatible with most 3D printer firmware. You can choose your preferred capacity here.
$24.99★★★★★39 review(s) - Custom Industrial Heater Upgrade your 3D printer hotend with this high power density 50W heater cartridge that is designed to work in enclosed heated chambers.
$19.99★★★★★2 review(s) - Copperhead® Silicone Boot Protect your Copperhead® Hot Block from cooling air and plastic adhesion with this silicone boot made by Slice Engineering. It's even made to repel plastic!
$4.99★★★★★21 review(s) - Hotend Mounting Screws for Bambu Lab Printers These screws are used for securely mounting hotends onto Bambu Lab 3D Printers, including both the X1 and P1 Series.
$1.99 - Copperhead® Hot Block This copper hot block with nickel plating helps your Copperhead™ Hotend melt plastic up to 450°C. Purchase this copper alloy hot block from Slice Engineering.
$24.99★★★★★22 review(s) - Nozzle Torque Wrench™ Adapter Convert your Nozzle Torque Wrench™ to a 7mm (9/32") hex with this steel adapter that allows you to easily install and remove a broader range of nozzles.
$3.99★★★★★3 review(s) - Heat Break Insulator This heat break Insulator insulates the Mosquito Magnum® Heat Break to help extend the plastic melt zone and increase printing speeds. Purchase yours now!
$29.99★★★★★9 review(s) - 50W 12V Heater Cartridge Start printing engineering-grade plastics today! This high-power density 50W heater cartridge from Slice Engineering is available in 12V variations.16% OFF
$15.99$18.99★★★★★39 review(s)
