The Craftbot Flow Upgrade Kit is a drop-in, plug-and-play replacement for the stock Craftbot Flow hotends. Utilizing the stock heat sink makes installation a breeze, allowing you to reap the benefits of the Copperhead hotend with minimal printer downtime. The kit also includes a GammaMaster® AP3X™ Nozzle for abrasion-resistant printing.
Bimetallic Heat Break™
Copperhead Bimetallic Heat Breaks are 60% more efficient at heat creep reduction than monolithic designs. Using the same high-strength copper alloy designed for optimal thermal conductivity found in Mosquito Heat Breaks, Copperhead Heat Breaks boast a higher temperature rating and flow rate potential over PTFE-lined heat breaks.
Super-Conductive Hot Block
Named for its hardened, nickel-plated, copper alloy construction, the Copperhead Hot Block is rated to 450°C and achieves 10 more watts of heating power than the stock Craftbot Flow hotend. The fast-heating hot block enables printing of nearly every commercially available filament, from basic PLAs to medical-grade PAEKs, and features convenient wrench flats to simplify nozzle changes.
Craftbot Flow Upgrade Kit Includes
- Copperhead Hot Block
- Copperhead Heat Break - CB-Flow
- GammaMaster Nozzle - AP3X - 0.4 mm
- Custom Industrial Heater - 50W 24V / 80mm / JST XHP-2
- Boron Nitride Paste - 1 cc
- Gourmet Orange Creamsicle Lollipop
- Slice Engineering Sticker
- Craftbot Flow
- Craftbot Flow XL
- Craftbot Flow IDEX
- Craftbot Flow IDEX XL
|Filament Diameter||1.75 mm|
|Maximum Flow Rate Capacity||20 mm3/s|
|Nozzle Compatibility||M6 x 1.0 (7 mm thread length)|
|Maximum Heating Power||50 W (24 V)|
|Temperature Sensor||Stock Craftbot Thermocouple (Not Included)|
|Manufacturing||Made in the USA|