Unleash the Power of Your Anycubic Mega 3D Printer
Upgrade your Anycubic Mega X, Mega S, or Mega Pro 3D printer with the Mega Upgrade Bundle to unlock enhanced printing capabilities. Available in multiple hotend options – Copperhead & Mosquito – this bundle transforms your printer into a direct-drive powerhouse, delivering faster print speeds, improved extrusion, and expanded filament compatibility.
Bimetallic Heat Break Technology
At the heart of our hotends lies our bimetallic heat break technology which eliminates heat creep and jamming, improves print resolution and allows for shorter retractions. Our hotends utilize this technology to offer precise temperature control and exceptional thermal efficiency, enabling you to print with a wide range of filaments.
Unparalleled Extrusion Performance
The Bondtech LGX is a powerful extrusion system that significantly improves extrusion through large drive gears and dual drive technology. This eXtruder ensures precise, reliable, and faster 3D printing, even with rigid and flexible materials, while enabling better retraction performance for quicker print times.
Upgrade Options
- LGX Shortcut Copperhead Hotend & LGX eXtruder : Perfect for those seeking enhanced printing capabilities
- LGX Shortcut Mosquito Hotend & LGX eXtruder : Perfect for those seeking enhanced printing capabilities and a One-Handed Nozzle Change™ with a Nozzle Torque Wrench (not included)
- Anycubic Mega X
- Anycubic Mega S
- Anycubic Mega Pro
- LGX Extruder
- LGX Feeder (1.75 mm)
- Bowden Interface Plug (with threaded metal push-fit)
- 30 mm PTFE Tube for the Direct Drive Interface Plug
- 2 mm Hex Key (recommended tool)
- 3x M3x30 mm Low Head Screws
- Product Line Information Brochure
- Powered By Bondtech Sticker
- Custom Nema17 25 mm Pancake Stepper Motor
- Direct Drive Interface Plug (for Slice Engineering® Hotends)
- 4x M3x18 mm Stud (with 5mm Hex & M3x4 threads)
- These studs are used to replace the 4 screws of the stepper motor for additional mounting points. Make sure not to use too much torque to tighten the studs as the stepper motor threads are delicate & made of aluminum. It is recommended to use finger force only.
- LGX Shortcut Hotend (Copperhead/Mosquito)
- LGX Shortcut Accessories for Anycubic
Free shipping over $50 is available for US customers only. See terms for full details.
Technical Specifications
Cooling | Air |
Filament Diameter | 1.75 mm |
Temperature Rating | 260°C* |
Maximum Flow Rate Capacity | See Hotend Comparison section below |
Nozzle Compatibility | M6 x 1.0 (7 mm thread length) |
Maximum Heating Power | 50 W (24 V) |
Temperature Sensor | Stock Anycubic Sensor |
* Temperature Limitations: Although our hotends are rated to 450°C - 500°C, Anycubic Mega Printers are limited to 260°C by their firmware. Unfortunately, there is no workaround to this at this time.
Hotend Comparisons
Copperhead Hotend® | The Original Mosquito® | Mosquito® Magnum | Mosquito Magnum+® | |
Max Flow Rate Capacity | 33 mm3/s (147 g/hr) | 35 mm3/s (156 g/hr) | 40 mm3/s (179 g/hr) | 90 mm3/s (402 g/hr) |
Nozzle Orifice | 0.2 – 0.8 mm | 0.2 – 0.8 mm | 0.4 – 1.2 mm | 0.4 – 1.8 mm |
Mass* | 21.2 - 39.1 g | 37 g | 41 g | 73 g |
Overall Height* | 27 - 59 mm | 41 mm | 41 mm | 60 mm |
Max Power | 50 W | 50 W | 50 W | 100 W |
Filament Size | 1.75 mm | 1.75 or 2.85 mm | 1.75 mm | 1.75 or 2.85 mm |
One-Handed Nozzle Change™ | No | Yes | Yes | Yes |
* Air-Cooled Version (1.75 mm); Mass/height includes the heat sink, heat break, & hot block