Adapters

The enthusiastic 3D printing community has created a wide variety of 3D-printable adapters for the Mosquito™ hotends. Check back frequently, as new ones are being posted all the time! Don’t see one that you need? Submit a request, and we’ll try to get one made. 

Check out the video below to see an example of how to use a 3D printed adapter with the Mosquito™ hotends.

We highly recommend using higher temperature/higher strength plastics for these adapters, as hotends do get hot… In most cases ABS will work, but please do not use PLA to mount Mosquito to your printer.

Creality/Ender
D-Bot
Formbot
Groovemount
Prusa

Prusa Mk3s/2.5s/MMU2s

This printable adapter is for those using the Mosquito™/Mosquito Magnum™ hotends with the Prusa Mk3/Mk3s, Prusa Mk2.5/Mk2.5s, and MMU2s Printer setups.

Prusa Mk2 with Groovemount Adapter

This printable adapter is for those using the Mosquito™/Mosquito Magnum™ hotends with the Prusa Mk2 printer and groovemount adapter.

Prusa Mk3s

This printable adapter is for those using the Mosquito/Mosquito Magnum hotends with the Prusa Mk3s exclusively.

SeeMeCNC
RailCore
Wanhao/Monoprice
Witbox
Voron